Sartorius SIWRDCP - Weighing Platform 1 Calibration and Adjustment; Calibration, Adjustment Procedures, and Preload; External Calibration and Weight Unit Settings

Signum 1-2-3
Settings
Settings
26
Setup
wp-1
1
1.9. Calibration and Adjustment
1.9.1 * Ext. calibration/adjustment; default weight
1.9.3 External calibration/adjustment; weight can be selected under menu item 1.18.1
1.9.4 Internal calibration/adjustment (models with built-in motorized calibration weight only)
1.9.8 Setting the preload
1.9.9 Deleting the preload
1.9.10 No function when you press the
J key
1.10. Calibration/Adjustment sequence
1.10.1 Calibration with automatic adjustment
1.10.2 * Calibration with manual adjustment
1.11. Zeroing range
1.11.1 1 percent/max. cap.
1.11.2 * 2 percent/max. cap.
1.12. Initial zero point range
1.12.1 * Factory setting (depending on the model type)
1.12.2 2 percent/max. cap.
1.12.3 * 5 percent/max. cap.
1.13. Tare/zero at power on:
1.13.1 * On
1.13.2 Off, load previous tare values
1.133 Only zero at power on
1.15. Calibration prompt for connected IS weighing platform
1.15.1 * Off
1.15.2 Calibration prompt W flashes on the display
1.16. External calibration
1
)
1.16.1 * Activated
1.16.2
2
) Blocked
1.17. Calibration weight unit
3
)
1.17.1 * Grams
1.17.2 Kilogram
1.17.4
1
) Pounds
1.18. Entering calibration weight
1.18.1 External user calibration weight (enter value, e.g.: 10,000 kg)
3. 1. Weight unit 2
3
)
3.1.1 Grams /o
1
)
3.1.2 Grams /g
3.1.3 * Kilograms /kg
3.1.4 Carats /ct
1
)
3.1.5 Pounds /lb
1
)
3.1.6 Ounces /oz
1
)
3.1.7 Troy ounces /ozt
1
)
3.1.8 Hong Kong taels /tlh
1
)
3.1.9 Singapore taels /tls
1
)
3.1.10 Taiwan taels /tlt
1
)
3.1.11 Grains /GN
1
)
3.1.12 Pennyweights /dwt
1
)
3.1.14 Parts per pound /lb
1
)
3.1.15 Chinese taels /tlc
1
)
3.1.16 Mommes /mom
1
)
3.1.17 Austrian carats /K
1
)
3.1.18 Tola /tol
1
)
3.1.19 Baht /bat
1
)
3.1.20 Mesghal /MS
1
)
3.1.21 Tons /t
1
)
3.1.22 Pound: Ounces
1
)
3.2. Display accuracy 2
1
)
3.2.1 * All digits
3.2.2 Reduced by 1 decimal place for load change
3.2.14 10-fold increased resolution
3.2.15 Increase resolution by 2 scale intervals
3.2.16 Increase resolution by 1 scale interval
3.3. Weight unit 3
3
): Parameters, see 3.1 Weight unit 2
3.4. Display accuracy 3
1
): Parameters, see 3.2 Weight unit 2
9.1. Restore factory settings in WP1 numeric menu
9.1.1 Yes
9.1.2 * No
1
) = Not available on instruments verified for use in legal metrology
2
) = Factory setting on instrument verified for use in legal metrology
3
) = Menu depends on weighing platform model