Chapter 3 Using F R O N T D I S P L A Y Using T H E M E N U S
60 PM130 PLUS Powermeter Series
2. If the parameter is represented by a list of values, select the required
option with the UP or DOWN arrow buttons.
3. If the parameter is represented by a numeric value, adjust the
number with the UP or DOWN arrow buttons. When the button is
briefly pressed and released, the number is incremented or
decremented by one. When the button is pressed continuously, the
number is changed approximately twice per second.
4. Press the ENTER button to store your selection or press the ESC
button to leave the parameter unchanged.
5. You return to the middle window and can continue scrolling through
the remaining parameters or return to the main menu.
6. Press ESC to exit the menu.
To Next Page
Loading...
Need help?
General
