SATO GL 4xxe Series Programming Reference Guide

Unit 7: Appendix
SATO GL4xxe SBPL Programming Reference Page 7-20
h Print Darkness Level 00H Darkness 0
01H Darkness 1
02H Darkness 2
03H Darkness 3
04H Darkness 4
05H Darkness 5 (Initial Value)
06H Darkness 6
07H Darkness 7
08H Darkness 8
09H Darkness 9
0AH Darkness 10
0BH Darkness 11
0CH Darkness 12
0DH Darkness 13
0EH Darkness 14
0FH Darkness 15
i Sensor Type 00H Reflective Sensor 1
01H See-through Sensor
02H Sensor - Ignoring type
j Zero Slash 00H Disable
01H Enable (Initial Value)
k Kanji Code 00H JIS Code (Initial Value)
01H Shift JIS Code
l Not Used 00H Fixed
m Not used 00H Fixed
n Proportional Pitch 00H Fixed Pitch
01H Proportional Pitch (Initial Value)
o Label Height (dots)
(Initial value for 203dpi : C80H)
(Initial value for 305dpi : 12C0H)
8 dots/mm : [15H to 4E94H] (21 to 20115)
12 dots/mm : [1FH to 75DFH] (31 to 30175)
p Label Width (dots)
(initial value for 203dpi : 340H)
(Initial value for 305dpi : 4E0H)
8 dots/mm : [15H to 340H] (21 to 832)
12 dots/mm : [1FH to 4E0H] (31 to 1248)
q Vertical Start Point Correction (dots)
(Initial value : 00H)
00H to 318H (0 to 792)
FFFFH to FCE8H (-1 to -792)
r Horizontal Start Point Correction (dots)
(Initial value : 00H)
00H to 318H (0 to 792)
FFFFH to FCE8H (-1 to -792)
s Not Used 00H Fixed
t Not Used 00H Fixed
u Not Used 00H Fixed
v Not Used 00H Fixed
w Not Used 00H Fixed
x Not Used 00H Fixed
y Buzzer sound setting 00H Yes (Initial value)
01H No
TABLE 28: PARAMETERS (<ESC>PG)
# ITEM DESCRIPTION

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English