SATO GL 4xxe Series Programming Reference Guide

Unit 7: Appendix
SATO GL4xxe SBPL Programming Reference Page 7-21
TABLE 29: PARAMETERS (<ESC>PC)
# ITEM # ITEM DESCRIPTION
b 1 Not used. 0 Fixed
c 2 Not used. 0 Fixed
d 3 Print Speed: 8 dots/mm
Initial Value: 2 (4 inch/s)
Range: 2 to 10 inch/s
Print Speed: 12 dots/mm
Initial Value: 2 (4 inch/s)
Range: 2 to 10 inch/s
0 2 inch/s
1 3 inch/s
2 4 inch/s
3 5 inch/s
4 6 inch/s
5 7 inch/s
6 8 inch/s
7 9 inch/s
8 10 inch/s
e 4 Not used. 0 Fixed
f 5 Not used. 0 Fixed
g 6 Not used. 0 Fixed
h 7 Not used. 0 Fixed
i1 8 Print Darkness 0 -
1 + (Initial value : 1)
i2 9 Print Darkness Level 0 Darkness 0
1 Darkness 1
2 Darkness 2
3 Darkness 3
4 Darkness 4
5 Darkness 5 (Initial value)
6 Darkness 6
7 Darkness 7
8 Darkness 8
9 Darkness 9
A Darkness 10
B Darkness 11
C Darkness 12
D Darkness 13
E Darkness 14
F Darkness 15
j 10 Not Used 0 Fixed
k 11 Zero Slash 0 Disabled
1 Enabled (Initial value)
l 12 Kanji Code 0 JIS Code (Initial value)
1 Shift JIS Code
m 13 Not Used 0 Fixed
n 14 Not Used 0 Fixed
o 15 Proportional Pitch 0 Fixed Pitch
1 Proportional Pitch (Initial value)
p 16 Label Height (dots) 8 dots/mm : 21 to 20115
12 dots/mm : 31 to 30175
q 17 Label Width (dots) 8 dots/mm : 21 to 832
12 dots/mm : 31 to 1248
r 18 Vertical Start Point Correction dots)
(Initial value : 0)
-792 to 792
s 19 Horizontal Start Point Correction (dots)
(Initial value : 0)
-792 to 792
t 20 Not Used 0 Fixed
u 21 Not Used 0 Fixed
v 22 Not Used 0 Fixed
w 23 Not Used 0 Fixed
x 24 Not Used 0 Fixed
y 25 Not Used 0 Fixed

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English