Unit 3: Command Quick Reference
SATO GL4xxe SBPL Programming Reference Page 3-13
GRccc Graphic, Recall. Recalls for printing the graphic image stored by the GI
command.
ccc = Storage number (001 to 999)
GTaaa,bbbbb, nn. . . n BMP File, Store. Stores BMP files in Expanded Memory.
aaa = Storage area number (001 to 999)
bbbbb = Size of BMP file in bytes
nn....n = Data
Haaaa Horizontal Position. Specifies a field’s horizontal location across the width
of the label from the current base reference point. The units of
measurement are dots.
IDaa Job ID Store. Stores the Job ID number.
aa = Job ID number assigned (01 to 99)
J Journal Print. Provides the ability to print text line by line. Fixed spacing
between lines and characters.
Kab90cc Custom Designed Characters, Recall. Recalls for printing a custom
character stored by the Tabcc(data) command.
a = 1: 16 x 16 matrix
2: 24 x 24 matrix
b = Indicates the format that data stream was stored
B: Binary
H: Hexadecimal
cc = Memory location where the character was stored. Valid
locations are 21 to 52 or “!” to “R” in hex values.
Laabb Character, Expansion. Expands characters in both directions.
aa = Multiple to expand horizontally (01 to 12)
bb = Multiple to expand vertically (01 to 12)
LAa Language. Specifies the display language for the LCD.
a = 0: English
1: French
2: German
3: Spanish
4: Italian
5: Portugese
6: Extensible language (Japanese, etc)
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
Need help?
General
