SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-37
SSCC
FUNCTION
Specifies SSCC (Serial Shipping Container Code) barcode.
FORMAT
<ESC>BIaabbbcn~n
a = Narrow bar width (01 to 12 dots)
b = Barcode Height (001 to 999 dots)
c = Barcode Expository Font Specification
0: No HRI
1: HRL available (upper part)
2: HRI available (lower part)
n = Print Data
For barcode data, refer to the UCC/EAN128 code table.
EAN128 (Barcode for Standard Carton ID) fixed 18 digits:
Identifier of a continuous code for freight packaging
Type of packaging
Country/manufacturer code
Serial number for shipping container
Check digit
Note that check digit is automatically added; therefore, specify
data in 17 digits excluding check digit.
Place anywhere after <ESC>V but before <ESC>Q.
EXAMPLE
Without incrementing:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>BI10415010123456000000001
<ESC>Q2
<ESC>Z
With incrementing:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>F001+001
<ESC>BI104150101234567000000001
<ESC>Q2
<ESC>Z

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English