SATO GL408e - ESC>& Form Overlay, Store; ESC>&S Form Overlay, Store; ESC>* Clear (Memory Card); ESC>A3 Start Point Correction

Unit 7: Appendix
SATO GL4xxe SBPL Programming Reference Page 7-23
System
<ESC>CS Print Speed
<ESC>#E Print Darkness
<ESC>~ Cut, Job
<ESC>C Reprint
<ESC>* Clear (Memory Card)
<ESC>@ Offline
<ESC>OL Online
Memory Card
<ESC>BJF Card Format
<ESC>GI Graphic, Store
<ESC>GT BMP File, Store
<ESC>PI PCX File, Store
<ESC>/D Field, Recall
<ESC>BJS Print Memory Card Status
<ESC>EX Print Length Expansion
TABLE 33: VALID COMMANDS (<ESC>&R)
Print Position <V> <H>
Font
<XU> <XS> <XM> <XB> <XL> <OA> <OB> <RD> <$=> <K1>
<K2> <K8> <K9> <k1> <k2> <k8> <k9>
Barcode <B> <BC> <BG> <BI> <BP> <D> <D<d>> <BD> <BT> <BW>
2D Code <BK> <BQ> <BV> <BX> <VC>
Modification <WD> <FW> <(> <RF>
Graphic <G> <GM> <GP>
TABLE 34: VALID COMMANDS (<ESC>&S)
Print Position <V> <H>
Font
<XU> <XS> <XM> <XB> <XL> <OA> <OB> <RD> <K1> <K2>
<K3> <K4> <K5> <K8> <K9> <KA> <KB> <KD> <k1> <k2>
<k3> <k4> <k5> <k8> <k9> <kA> <kB> <kD>
Barcode <B> <BC> <BG> <BL> <BP> <D> <D><d> <BD>
2D Code <BK> <BQ> <BV> <BX> <VC>
Modification <WD> <FW> <(> <RF>
Graphic <G> <GM> <GP>
TABLE 35: ERROR COMMANDS (<ESC>&S)
COMMAND DESCRIPTION COMMAND DESCRIPTION
<ESC>A Data Transmission Start <ESC>* Clear (Memory Card)
<ESC>Z Data Transmission End <ESC>BT Variable Ratio Barcodes
<ESC>C Reprint <ESC>BW Barcode Expansion
<ESC>0 Partial Edit <ESC>& Form Overlay, Store
<ESC>A3 Start Point Correction <ESC>YS Format, Store
<ESC>CS Print Speed <ESC>/N Field, Store
<ESC>#E Print Darkness <ESC>GI Graphic, Store
<ESC>@ Offline <ESC>PI PCX File, Store
<ESC>ID Job ID Number <ESC>BJF Card, Format
TABLE 32: INVALID COMMANDS (<ESC>YS)
CLASS COMMAND COMMAND NAME