SATO GL408e - Recall and Print of Font & Logo

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-20
RECALL AND PRINT OF FONT & LOGO
FUNCTION
Calls and prints fonts and logos downloaded with the exclusive tool.
FORMAT
<ESC>RF
a = Font ID number (01 to 99)
b = Print digit (1 to 9999)
n=Print data
Place after <ESC>H but before <ESC>Q1.
EXAMPLE
<ESC>A
<ESC>H0100<ESC>V0100<ESC>RF020002,826B
<ESC>Q1
<ESC>Z
OUTPUT
(4-15)
NOTES
Specify the value of Unicode for print data. When calling and printing a logo, specify
Print digit: 0002, Print data: <6B82>
16. Note that <826B>16 is the value of Shift JIS
code of L.