Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-58
REPEAT LABEL
FUNCTION
To print a duplicate of the last label printed.
FORMAT
<ESC>C
Place immediately after <ESC>A and immediately before <ESC>Z in a separate data
stream.
EXAMPLE
<ESC>A
<ESC>C
<ESC>Z
OUTPUT
A duplicate of the previous label will be printed.
NOTES
This command will not have an effect if the printer’s power is cycled off and back on
since printing the previous label.
To Next Page
Loading...
