SATO GL408e - Page 95

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-57
OFFLINE/PAUSE
FUNCTION
Specifies when, and under what circumstances, the printer goes into an off-line state.
When used within a print job, the printer goes off-line after finishing the print job.
FORMAT
<ESC>@,nn . . . n
nn...n = Optional display message on the LCD (32 characters max.)
Place anywhere between <ESC>A and <ESC>Z.
EXAMPLE
<ESC>A
<ESC>@, LOAD BLUE LABELS AND PLACE PRINTER ON-LINE
...Job...
<ESC>Z
OUTPUT
This command does not result in printer output. The printer is placed in the Off-Line
mode as soon as the current print job is finished.
NOTES
When using this command and the print job specifies <ESC>Q10, all ten labels will
print before the printer goes off-line. Press the LINE key to return the printer to an on-
line status.
ONLINE
FUNCTION
Changes the printer from offline to online status.
FORMAT
<ESC>OL
Place anywhere between <ESC>A and <ESC>Z.
EXAMPLE
<ESC>A
<ESC>OL
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
Up to 32 characters are available for LCD messages.
In the printer’s Receive Mode, specify the single-item buffer mode. This command is
not disclosed to users.