SATO GL408e - Cutting Operation

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-50
CUTTING OPERATION
FUNCTION
To specify the movement of cutting.
FORMAT
<ESC>NC
EXAMPLE
<ESC>A
<ESC>NC
<ESC>Z
c Label stop position
A : Print completed
B : Not printed
C : Not printed
D : Not printed
" Receiving command
" Feeding label to cutting
position
" Cutting label
" Backfeeding to the head
position
NOTES
This command is valid only for the printer equipped with cutter. This command
discharges and cuts labels. Delimit Start of Data Transmission <A> and End of
Transmission <Z> with this command for use. This command cannot be used in
combination with other commands. This command is valid when printer is in standby
state after the completion of print.