SATO GL408e - Page 26

Unit 3: Command Quick Reference
SATO GL4xxe SBPL Programming Reference Page 3-6
BJTaabbccddeefffgg..g True Type Font, Recall. Recalls a previously stored bit mapped TrueType
font for use.
aa
= Font ID (01 to 99)
bb
= Horizontal Expansion (01 to 12)
cc
= Vertical Expansion (01 to 12)
dd
= Reserved, always 00
ee
= Character pitch (01 to 99)
ffff
= Number of characters
gg...g
= Data to be printed using font
BKaabbcddeeefffnn...n PDF417. Prints PDF417 2-D symbols.
aa = Minimum module dimension (03-09 dots). Will not print for
values of 01, 02 or greater than 09.
bb = Minimum module pitch dimension (04-240 dots). Will not
print for values of 01, 02, 03 or greater than 25.
c = Security level (1-8).
dd = Code words per line (01-30). If 00 is specified for dd and
ee, printer will automatically optimize settings.
ee = Rows/symbol (00 or 03). If 00 is specified for dd and ee,
printer will automatically optimize settings.
fff = Number of characters to be encoded (0001-2700)
g = Not specified, standard PDF417
M: Micro PDF417
T: Truncated PDF417
nn...n = Data to be printed.
BPn...n Postnet. Prints Postnet bar codes.
n...n = 5 digit ZIP (Postnet-32 format)
6 digits (Postnet-37 format)
9 digit ZIP+4 (Postnet -52 format)
11 digit ZIP+4+DPC (Postnet-62, Delivery Point format).
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION