SATO GL408e - Page 29

Unit 3: Command Quick Reference
SATO GL4xxe SBPL Programming Reference Page 3-9
CLa CL/LF Deletion. Deletes the occurrence of CR/LF characters in the data
stream.
a
=
0: Do not delete CR/LF
1: Delete CR/LF
CSa Print Speed Selection. Specifies a unique print speed in in./sec. through
software for a particular label.
a
=
Speed Range
Dabbcccn Barcode, Human Readable Information (HRI). Specifies the character
type of human readable information of barcode.
a
=
3: JAN/EAN13
4: JAN/EAN8
H: UPC-A
b
=
Narrow bar width (01 to 12 dots)
c
=
Barcode height (001 to 999 dots)
n
=
Barcode print data
dn...n Barcode, Human Readable Information (HRI). Specifies the character
type of human readable information of barcode. May be used in
conjunction with the preceding <ESC>D.
d
=
Character type specification
XU
XS
XM
XB
XL
OA
OB
HRI data
n
=
HRI print data
DCxx...x Data Matrix. Print Data. Prints data using Data Matrix format specified in
BX Data Format command.
xx...x = Data to be printed. Cannot exceed 500 characters.
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION