Unit 3: Command Quick Reference
SATO GL4xxe SBPL Programming Reference Page 3-11
FC Print, Circles. Specifies the printing of circles.
a = Radius (5 to 999 dots)
b = Line width (1 to 999 dots)
c = Sectional number (0 to 8 dots)
d = Pattern (0to 3)
0: Solid black line
1: Gray 1
2: Gray 2
3: Gray 3
FM Memory Cartridge Format. Formats the memory cartridge. Up to 8 bytes
of alphanumeric and symbol (omissible)
FP Memory Cartridge Printing. Printing the memory cartridge. It will be
printed by width 100mm and pitch 100mm.
FT Print, Triangles.
a = Side length (10 to 2000 dots)
b = Line width (01 to 1000 dots)
c = Base length (10 to 2000 dots)
d = Pattern (0 to 3)
0: Solid black line
1: Gray 1
2: Gray 2
3: Gray 3
FWaabcccc Line. Prints a line. Units of measurement are dots.
aa = Width of line
b = V: Vertical line
H: Horizontal line
cccc = Length of line
FWaabbVcccHdddd Box. Prints a box. For values aa, bbbb, cc, and dddd, see instructions for
horizontal and vertical lines. Units of measurement are dots.
aa = Width of horizontal side
bb = Width of vertical side
cccc = Length of vertical side
dddd = Length of horizontal side
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
