SATO GL408e - 1. Introduction to the RFID Configuration Options; RFID Menu Settings Overview

iv
<ESC>BV Maxi Code 4-43
<ESC>BX Data Matrix Code 4-44
<ESC>DC Data Matrix Code, Data 4-45
<ESC>FX Data Matrix Code, Sequential Number 4-46
System Commands 4-47
<ESC>CS Print Speed 4-47
<ESC>#E Print Darkness 4-48
<ESC>NC Cutting Operation 4-49
<ESC>A3 Base Reference Point 4-50
<ESC>AR Print Area, Standard 4-51
<ESC>AX Print Area Enlargement 4-51
<ESC>EP Print End Position 4-51
<ESC>~a Cut, Job 4-52
<ESC>~A Cut, Label 4-53
<ESC>~B Cut, Last 4-54
<ESC>* Clear Print Jobs & Memory 4-55
<ESC>@ Offline/Pause 4-56
<ESC>OL Online 4-56
<ESC>C Repeat Label 4-57
<ESC>PG EEPROM Setup 4-58
<ESC>PC Flash ROM Setup 4-58
<ESC>I2 Serial Interface, Configuration 4-59
<ESC>IG Sensor Type Selection 4-60
<ESC>E Line Feed 4-61
<ESC>LD User Download 4-62
<ESC>LA Language 4-63
<ESC>CL CL/LF Deletion 4-63
<ESC>LH Zero Slash 4-64
<ESC>AO Auto Online 4-64
<ESC>LF Online Feed 4-65
<ESC>EX0 Print Length Expansion 4-66
Graphic Commands 4-67
<ESC>G Graphics, Custom 4-67
<ESC>GM Graphics, BMP File 4-68
<ESC>GP Graphics, PCX File 4-69
<ESC>WDH Copy Image Area 4-70
OPTIONAL COMMAND CODES
Calendar Commands 5-2
<ESC>WA Calendar Printing 5-2
<ESC>WP Calendar Increment 5-3
<ESC>WT Calendar Configuration 5-4
Memory Card Commands 5-5
<ESC>CC Card, Slot for Use 5-5
<ESC>BJF Card, Format 5-6
<ESC>FM Memory Cartridge Format 5-7
<ESC>FP Memory Cartridge Printing 5-7
<ESC>* Memory Card Clear 5-8
<ESC>BJS Print Memory Card Status 5-9
<ESC>BJT True Type Font, Recall 5-10
<ESC>BJ/BJD True Type Font, Store 5-11
<ESC>YR/ID Format/Field, Recall 5-12
<ESC>YS/IN Format/Field, Store 5-13
<ESC>&R Form Overlay, Recall 5-14
<ESC>&S Form Overlay, Store 5-15
<ESC>GC BMP File, Recall 5-17
<ESC>GT BMP File, Store 5-18
<ESC>PY PCX File, Recall 5-19
<ESC>PI PCX File, Store 5-20
<ESC>GR Custom Graphic, Recall 5-21
<ESC>GI Custom Graphic, Store 5-22
<ESC>T Character, Custom Designed 5-23