www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
17
1. Explanation of the symbols on the device
m
Observe warnings and safety instructions!
Read the operating and safety instructions before start-up and follow them!
Wear eye protection!
Wear hearing protection!
If dust builds up, wear respiratory protection!
Danger of injury due to a rotating tool! Keep your hands away.
Keep third-parties away from the danger zone.
Warning! The electrical connection must be established by an electrician and must comply with IEC 364. It is recom-
mended that a residual current circuit breaker be installed in the electrical connection to this device, which disconnects
the mains voltage if the residual current circuit breaker exceeds 10mA for 30 ms.
To Next Page
Loading...
