Assembly
36 14.00 | GSM-P | Assembly and Operating Manual | en | 389104
5.4 Mounting a customized construction
CAUTION
Damage to the unit during assembly!
When inserting the cylindrical pins or centering sleeves, the unit
must not be subjected to any impact.
Mounting of a customized construction to the gripper fingers
GSM-P
It is recommended to use the width of the gripper finger which is
designed as the fit size for the centering of the customized top
jaws. It is also recommended to use the upper contact surface of
the gripper finger to support the customized top jaws.
No mounting screws are included in the scope of delivery.
To Next Page
Loading...
