Commissioning
10.00 | SRU | Assembly and Operating Manual | en | 389439
33
Ø Continue to open the exhaust throttle valve incrementally until
the movement decelerates smoothly.
✓ If the speed is too low, the product will brake too soon and
the end position will be reached too slowly.
✓ If the speed is too high, the product will impact against the
end position and the shock absorber will be overloaded.
NOTE
A smooth motion may also be too slow in many use-cases.
Further settings can be made via the shock absorbers, Adjustment
of the shock absorber stroke [
}
34].
To Next Page
Loading...
Need help?
General
