Transport, storage and disposal
05/STM-48V/en/2011-04-01/CW 71
15 Transport, storage and disposal
15.1 Transport
• The packaging must protect the drive from all external effects
(such as mechanical shocks and humidity).
• Protect the module from shocks.
• Package the module in such a way that the electrical supply
lines do not obstruct transport and are not damaged
themselves.
• Comply with climatic category 2K3 in accordance with
EN50178.
• Transport temperature -5°C (+23°F) to +60°C (+140°F), with
maximum fluctuations of 20 K/hour.
• Transport air humidity: relative humidity of 5%-95%, non-
condensing.
• During transport and handling, make sure that none of the
components are bent or insulation space is changed.
• The STM contains components that are sensitive to
electrostatic charge. Avoid any electrostatic charging of the
STM.
15.2 Packaging
• Cardboard packaging with paper foaming
• The maximum stacking height is three modules.
To Next Page
Loading...