Assembly and installation
04.00 | SVH | Assembly and Operating Manual | en | 389734 21
Connections on the
product
Connection to the 5-finger gripping hand SVH
1 Flange with seal for
mechanical mounting
3 Bore hole for centering
pin
2 Adapter board
Flat change system
Using the flat change system, the product can be mounted on an
external robot arm.
Connection to the flat change system
1 Supply voltage 24VDC on
soldering surfaces
3 RS485/USB interface
converter ("Brainbox")
2 Flat change system 4 USB isolator
JST JST plug connector
The FWK115‐ISO flat change system is comprised of the following
components:
l
Clamping ring
l
Flange
l
Adapter board
To Next Page
Loading...