What to do if the printer does not work with SciCan Laboratory Equipment?
If the printer is not working with your SciCan Laboratory Equipment, ensure that the printer cable is securely connected to the connector on the back of the STATIM. Also, make sure that the printer is powered ON. Power the unit OFF for 10 seconds and then power it ON again.
What to do if SciCan Laboratory Equipment touchscreen is blank or white?
If the touchscreen on your SciCan Laboratory Equipment is blank or white, it may be due to a power interruption during a firmware upgrade. Power off the unit and then power it back on. It may take up to 6 minutes for the main menu screen to appear.
What to do if SciCan Laboratory Equipment USB storage device does not contain the last print out?
If your SciCan Laboratory Equipment USB storage device does not contain the last print out, re-insert the USB storage device and wait for the data to copy over again. If the problem continues, back up all the information on the USB device and reformat it.
Overview of the STATIM G4 Cassette Autoclave as a compact, countertop unit for steam sterilization.
Rules for water usage, servicing, and safe operation of the STATIM unit.
Explanation of the STATIM 2000 G4 and 5000 G4 drying technology using forced air and heat.
Identifies key components and symbols for the STATIM 2000 G4 unit.
Explanation of warning symbols used in the manual and on the unit.
Identifies key components and symbols for the STATIM 5000 G4 unit.
Explanation of warning symbols used in the manual and on the unit.
Guides for setting the unit's time, date, DST, and date format.
Procedures for changing the displayed language and assigning unit identifiers.
Steps for creating user IDs, PINs, and enabling process enforced usage.
Customizing display themes, screensaver, contrast, and network configurations.
Guidelines for placing and connecting the STATIM unit to a power source.
Procedure for ensuring the STATIM unit is stable and properly leveled using the bubble indicator.
Instructions for connecting the waste bottle and its tubing to the STATIM unit.
Steps to correctly fill the STATIM's water reservoir with approved water.
Procedure to prime the STATIM pump by draining water from the unit.
Steps for preparing the STATIM unit for shipping, including draining the reservoir.
Instructions for setting the unit's time, date, DST, and date format.
Guide to changing the displayed language on the STATIM touchscreen interface.
Procedure for assigning a unique identifier number to the STATIM unit.
Steps to create user IDs and PINs for security and access control on the STATIM.
How to activate process enforced usage requiring user PINs for cycles.
Customizing the STATIM touchscreen display by changing themes via USB.
Setting the inactivity time before the STATIM screensaver activates.
Adjusting the contrast of the STATIM touchscreen for better visibility.
Enabling or disabling the audible beep when buttons are pressed on the STATIM.
Adjusting the volume level for button press sounds on the STATIM.
Connecting to and utilizing the STATIM G4 web portal for real-time data and records.
Instructions for connecting the STATIM G4 to a wired network via Ethernet.
Steps to connect the STATIM G4 to a wireless network using Wi-Fi.
Procedure for assigning a permanent IP address to the STATIM via router settings.
Detailed instructions for opening, closing, and inserting the STATIM 2000 G4 cassette.
Procedure for safely removing the cassette from the STATIM unit.
Detailed instructions for opening, closing, and inserting the STATIM 5000 G4 cassette.
Procedure for safely removing the cassette from the STATIM unit.
Guidelines for cleaning and arranging instruments for sterilization in the cassette.
Instructions for arranging unwrapped instruments to ensure proper steam penetration and drying.
Procedure for loading wrapped instruments into autoclave bags for sterilization.
List of sterilizable rubber and plastic materials and loading guidelines.
List of materials that cannot be sterilized in the STATIM due to damage risk.
Recommendations for using biological and chemical indicators for sterilization validation.
Steps for using biological and chemical indicators for sterilization validation.
Guide to typical instrument weights for proper STATIM load balancing.
Initial steps to prepare the STATIM unit for its first sterilization cycles.
Overview of the sterilization cycles available for the STATIM 2000 G4 unit.
Details of the Unwrapped Cycle for solid metal instruments on the STATIM 2000 G4.
Details of the Wrapped Cycle for sealed metal instruments on the STATIM 2000 G4.
Details of the Rubber and Plastics Cycle for specific materials on the STATIM 2000 G4.
Description of the Air Dry Only cycle for enhancing instrument dryness on the STATIM 2000 G4.
Overview of the sterilization cycles available for the STATIM 5000 G4 unit.
Details of the Unwrapped Cycle for light loads on the STATIM 5000 G4.
Details of the Wrapped Cycle for sealed instruments on the STATIM 5000 G4.
Details of the Rubber and Plastics Cycle for specific materials on the STATIM 5000 G4.
Details of the Heavy Duty Unwrapped Cycle for larger loads on the STATIM 5000 G4.
Step-by-step guide on how to operate and run sterilization cycles on the STATIM.
Warning screen prompting to level the unit for optimal instrument dryness before starting a cycle.
Graphical representation and timing of the STATIM 2000 G4 sterilization cycle phases.
Information on cycle completion, air drying, and handling of hot cassettes.
Instructions on how to stop a sterilization cycle and handle potential faults or non-sterile results.
Accessing stored cycle data directly from the STATIM touchscreen interface.
Transferring cycle data from the STATIM to a computer using a USB storage device.
Detailed breakdown and explanation of information found on a STATIM cycle printout.
Steps to generate a temporary security token for remote access to the STATIM G4.
Instructions for connecting an external printer to the STATIM G4 via RS232 port.
Guide to configuring printer settings for the STATIM G4.
List of recommended external printers and their technical specifications for the STATIM.
Procedure for cleaning the STATIM cassette interior surfaces to maintain hygiene and function.
Instructions for cleaning the water reservoir filter to ensure proper water flow.
Steps for cleaning the STATIM's water reservoir, emphasizing water quality.
Procedure for replacing the bacteria retentive and air filters on the STATIM units.
Instructions for replacing the STATIM cassette seal to ensure proper closure and steam containment.
Monitoring and refilling the STATIM water reservoir and waste bottle.
Checking and interpreting the water quality status on the STATIM display.
Accessing the STATIM G4's built-in help and instruction guides.
Recommended daily, weekly, and periodic maintenance tasks for the STATIM.
Annual maintenance tasks for cassette, filters, valves, pump, and calibration.
Solutions for common STATIM cycle interruption or fault messages.
Troubleshooting steps for excessive steam leaks from the STATIM unit.
Diagnosing and resolving issues when the STATIM unit fails to start or display correctly.
Steps to troubleshoot and fix problems with the connected printer.
Steps to troubleshoot power issues with the STATIM unit.
Diagnosing and resolving leaks or water accumulation under the STATIM.
Troubleshooting steps to ensure instruments are properly dried after a cycle.
Correcting incorrect time and date settings on the STATIM unit.
Troubleshooting blank or white touchscreen displays on the STATIM unit.
Resolving issues where the USB device does not save cycle data correctly.
Diagnosing network connectivity issues indicated by an X on the STATIM touchscreen.
Troubleshooting STATIM email notification sending and receiving problems.
List of replacement parts and order numbers for STATIM 2000/5000 G4 units.
List of optional accessories available for STATIM 2000/5000 G4 units.
Details of the one-year limited warranty covering STATIM 2000/5000 G4 units and exclusions.
Technical specifications for the STATIM 2000 G4, including dimensions, volume, and ratings.
Technical specifications for the STATIM 5000 G4, including dimensions, volume, and ratings.
Definitions and interpretation of terms used in the SciCan Software Product License Agreement.
Grant of license for the SciCan Software Product, terms of use, and site restrictions.
Prohibitions on copying, modification, reverse engineering, and distribution of the software.
SciCan's policies and obligations regarding software updates and customer support.
Statement of SciCan's ownership of the software, updates, and documentation.
SciCan's indemnity obligations regarding patent and copyright infringement claims.
Warranties regarding title, functionality, and services for the SciCan Software Product.
Limits on SciCan's liability for damages related to the software and equipment.
Obligations of parties to maintain confidentiality of proprietary information.
Governing law and venue for the SciCan Software Product License Agreement.
Procedures for providing formal notices under the license agreement.
Conditions and restrictions on assigning the license agreement.
Notes on FCC and IC RF exposure compliance requirements for the transmitter antenna.
Details of the Wi-Fi module, frequency range, and output power.
Recommendations for securing Wi-Fi networks and passphrases for optimal privacy.
Advice on ensuring network security is configured for WPA2.
Guidelines for creating strong and secure network passphrases.
Overview of selecting between wired and wireless network connections for the STATIM.
Step-by-step guide for connecting the STATIM to a wireless network.
Information on FCC approval for wireless devices and identifying the FCC ID.
Details of the preinstalled wireless LAN adapter, including FCC ID and model.
Statement on FCC compliance with SAR requirements for radiated energy.
Compliance with FCC Part 15 Subpart B limits for Class B digital devices.
Information on IC approval for wireless devices and identifying IC certification.
Details of the preinstalled wireless LAN adapter, including IC ID and model.
Conditions for low power license-exempt radio devices according to RSS-210.
Compliance with Health Canada's RF exposure limits for general population.
FCC declaration of conformity for Class B digital device, including interference guidelines.
Contact information for SciCan Ltd. regarding FCC compliance and support.
Industry Canada statement of compliance for Class B digital apparatus.
General| Cycle Time (Unwrapped) | 6 minutes |
|---|---|
| Weight | 73 lbs (33 kg) |
| Voltage | 120 V |
| Warranty | 2 years |
| Reservoir Capacity | 1.5 L |
| Sterilization Temperature | 132 °C |
| Power Requirements | 15 A |
To Next Page
