Page 10
4.0 INSTALLATION & SET UP
CAUTION: THIS SECTION DISCUSSES INSTALLATION AND SET-UP PROCEDURES.
PLEASE READ THOROUGHLY BEFORE OPERATING THIS MACHINE.
4.1 PHYSICAL DIMENSIONS
INCHES CM
A. Floor to Punch Ram 43-3/16 109.7
B. Floor to Top of Die Holder 41 104.1
C. Floor to Punch Bolster 36-3/8 92.4
D. Floor to Bottom Rail 3 7.6
E. Floor to Bar Shear 29-13/16 75.7
F. Floor to Tool Table 45-3/16 114.8
G. Height 71-1/4 181
H. Length 76 193
I. Punch Stroke 2-1/4 5.7
J. Width 30-7/8 78.3
K. Weight 4,000 LBS. 1,814 KG.
To Next Page
Loading...
