Page 13
After the machine has been located, remove the side shrouds and inspect the interior of the machine for
possible shipping damages.
CHECK SPECIFICALLY THE FOLLOWING ITEMS:
A. Stroke control handles and limit switches.
B. Pump and motor assembly.
C. Hydraulic hoses and fittings.
D. Starter box and control box.
E. Electrical connections.
F. Control valve.
The reservoir is full of oil. The recommended oil is a lightweight, non-foaming, anti-wear, hydraulic oil
such as Mobil DTE-25, with a minimum ISO cleanliness code of 20/18/15, or equivalent.
The reservoir holds 13.5 U.S. gallons (51 liters).
4.3 PHYSICAL INSPECTIONS
CAUTION: DO NOT OVER FILL!
To Next Page
Loading...
