Page 2
TABLE OF CONTENTS
SECTION DESCRIPTION PAGE #
1.0 INTRODUCTION 4
2.0 SAFETY PRECAUTIONS 4
2.1 WARRANTY 5
3.0 WARNING LABELS 8-9
4.0 INSTALLATION & SET-UP 10-19
4.1 Physical Dimensions 10
4.2 Machine Moving Procedures 12
4.3 Physical Inspections 13
4.4 Electrical Requirements 14
4.5 Machine Start Up 14
4.6 Machine Stroke Inspection & Adjustment 18
5.0 MAINTENANCE 20-23
5.1 Lubrication 20
5.2 Routine Lubrication 20
5.3 Scheduled Maintenance 22
6.0 MACHINE OPERATION 24-34
6.1 Punch Operation 24
6.1B Stripper Adjustment 28
6.2 Bar Shear Operation 29
6.2A Shear Arm Adjustment 30
6.2B Shear Blade Adjustment 32
7.0 OPTIONAL TOOL OPERATION 35-59
7.1 6 x 6 Angle Shear 35
7.2 Rod Shear 38
To Next Page
Loading...
