30
Stage 11) Setting – Hypo Warning
In 11
th
stage, you set the Hypo Warning function.
1. After Printing Page setting, the display for setting Hypo Warning will appear.
2. Set Hypo Warning ‘off’ or the result you want to select among 60, 70, 80 mg/dL by
pressing either
or button and then selecting the preferred feature by pressing the
button.
Default Setting: Off
NOTE:
t You can set the Analyzer to let you know when your glucose result indicates possible low blood
glucose (hypoglycemia). You can also select what blood glucose level you want this indicator to have
60, 70, 80 mg/dL.
t If your glucose results are lower than selected hypo result, hypo symbol will appear on LCD with a ‘beep’
sound. It is very important to manage your hypoglycemia.
To Next Page
Loading...