Section 2: Description of SBE 19plus V2
20
Shown below is the vertical mount plumbing arrangement of a 19plus V2
equipped with the standard SBE 5M miniature pump (standard plastic or
optional titanium).
• Main plumbing is 13 mm ID x 19 mm OD
(1/2 inch x 3/4 inch) Tygon tubing.
• A 13 mm (1/2 inch) long piece of
9.5 mm ID x 13 mm OD (3/8 inch x 1/2 inch)
Tygon tubing is installed on the conductivity
cell exhaust to provide tight seals to the main
plumbing when optional anti-foul fittings are
installed on the 19plus V2.
Air bleed valve detail
Note: Periodically clean air
bleed valve to ensure
proper functioning.
0.5 mm (0.02 in.)
27
To Next Page
Loading...