Section 4: Deploying and Operating SBE 19plus V2
64
OutputFormat=3 (engineering units in decimal)
Data is output in the order listed, with a comma followed by a space between
each parameter. Shown with each parameter are the number of digits and the
placement of the decimal point. Leading zeros are suppressed, except for one
zero to the left of the decimal point.
Uploaded Data (from GetSamples:b,e, or DDb,e)
1. Temperature
temperature (°C, ITS-90) = ttt.tttt
2. Conductivity
Conductivity (S/m) = cc.ccccc
3. Pressure (strain-gauge or Quartz - PType=1 or 3)
pressure (decibars) = pppp.ppp
4. External voltage 0 (if Volt0=Y)
external voltage 0= v.vvvv
5. External voltage 1 (if Volt1=Y)
external voltage 1 = v.vvvv
6. External voltage 2 (if Volt2=Y)
external voltage 2 = v.vvvv
7. External voltage 3 (if Volt3=Y)
external voltage 3 = v.vvvv
8. External voltage 4 (if Volt4=Y)
external voltage 4 = v.vvvv
9. External voltage 5 (if Volt5=Y)
external voltage 5 = v.vvvv
10. SBE 38 secondary temperature (if SBE38=Y)
SBE 38 temperature (°C, ITS-90) = ttt.tttt
11. GTD #1 pressure (if GTD=Y or DualGTD=Y)
GTD #1 pressure (millibars) = ppppppppp / 100,000
12. GTD #1 temperature (if GTD=Y or DualGTD=Y)
GTD #1 temperature (°C, ITS-90) = tt.ttt
13. GTD #2 pressure (if DualGTD=Y)
GTD #2 pressure (millibars) = ppppppppp / 100,000
14. GTD #2 temperature (if DualGTD=Y)
GTD #2 temperature (°C, ITS-90) = tt.ttt
15. Salinity (if OutputSal=Y)
salinity (psu) = sss.ssss
16. Sound velocity (if OutputSV=Y)
sound velocity (meters/second) = vvvv.vvv
17. Time (Moored mode [MM] only)
date, time = dd Mmm yyyy, hh:mm:ss
(day month year hour:minute:second)
Polled Data from SL, SLT, TS, TSS, or TSSOn:
If OutputUCSD=Y and the 19plus V2 is logging (autonomous sampling is in
progress), data is followed by density sigma-t in kg/m
3
(ddd.dddd), battery
voltage (vv.v), and operating current in mA (ccc.c), each separated by a
comma and a space. The rest of the data stream is as described above for
uploaded data.
Example: Profiling mode, 2 external voltages sampled,
example scan = ttt.tttt, cc.ccccc, pppp.ppp, v.vvvv, v.vvvv = 23.7658, 0.00019, 0.062, 0.0590, 0.1089
• Temperature = ttt.tttt = 23.7658; temperature (°C, ITS-90) = 23.7658
• Conductivity = cc.ccccc = 0.00019; conductivity (S/m) = 0.00019
• Pressure = pppp.ppp = 0.062; pressure (decibars) = 0.062
• First external voltage = v.vvvv = 0.0590; voltage = 0.0590 volts
• Second external volta
e = v.vvvv = 0.1089; volta
e = 0.1089 volts
71
To Next Page
Loading...