CONTROLS/INSTRUMENTS/EQUIPMENTS
Limited-Speed Operation
TYPE COLOR
ENGINE RPM
RESTRICTION
Normal key Yellow None
Rkey
Orange
+/- 6500
Learning key
Green
+/- 5500
The Sea-Doo Learning Key
TM
or R Key
(rental) can be programmed to limit
the speed of the watercraft, therefore
enabling first time users and less ex-
perienced operators to learn how to
operate the watercraft while gaining
the necessary confidence and control.
F00L2SY
TYPICAL - LEARNING KEY - GREEN
smo2006-002-002
RKEY—ORANGE
SeeanauthorizedSea-Doodealerto
have your key programmed accord-
ingly.
2) Handlebar
The handlebar controls the direction of
the watercraft. Turning the handlebar
to the right steers the watercraft to the
right and inversely.
WARNING
Check handlebar and correspond-
ing steering nozzle and side vanes
operation before starting. Never
turn handlebar while someone is
nearby rear of watercraft. Keep
away from steering moving parts
(nozzle, side vanes, linkage etc.).
Adjustment
RXP-X 255 Model
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, see an au-
thorized Sea-Doo dealer.
3) Throttle Lever
GTS Pro Model
When the throttle lever is pressed, the
watercraft accelerates. When fully
released, engine automatically slows
down to idle speed and the watercraft
is gradually stopped by water drag.
_______________
37