EasyManua.ls Logo

Sea-doo 2011 RXP-X - Engine Start;Stop Button; Variable Trim System (VTS)

Sea-doo 2011 RXP-X
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROLS/INSTRUMENTS/EQUIPMENTS
smo2008-001-008_a
1. Throttle lever
2. To accelerate
3. To decelerate
Finger Throttle
RXP-X 255 Model
Provides more comfortable throttle op-
eration under demanding conditions.
When pulled, the watercraft acceler-
ates. When fully released, engine au-
tomatically slows down to idle speed
and watercraft is gradually stopped by
water drag.
smo2010-001-006_a
1. Throttle lever
2. To accelerate
3. To decelerate
4) Engine Start/Stop
Button
To start engine, depress and hold the
start/stop button. Release immedi-
ately after engine is starte
d.
To stop engine, depress the start/stop
button. When stopped, disconnect
the tether cord from the engine cut-off
switch. It is suggested to release
throttle lever first.
WARNING
Directional control is reduced
when the throttle is released and
lost when engine is off.
smo2008-001-010_a
TYPICAL GTS PRO
1. Engine start/stop button
smo2008-001-011_a
RXP-X 255 MODEL
1. Engine start/stop button
5) Variable Trim System
(VTS)
RXP-X 255 Model
Provides watercraft trim adjust-
ments, maximizes acceleration and
high-speed stability.
38
______________

Table of Contents

Related product manuals