EasyManua.ls Logo

Sea-doo 2011 RXP-X - Maintenance Schedule

Sea-doo 2011 RXP-X
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIAL PROCEDURES
Towing the Watercraft in
Water
Special precautions should be taken
when towing a Sea-Doo watercraft in
water.
The maximum recommended towing
speed is 24 km/h (15 MPH).
When towing your watercraft in water,
pinch the water supply hose from the
exhaust manifold to the muffler with a
largehosepincher(P/N529032500).
F01B23Y
This will prevent the exhaust system
from filling which may lead to water be-
ing injected into and filling the engine.
Without the engine running, there isn't
any exhaust pressure to carry the wa-
ter out the exhaust outlet.
NOTICE
Failure to follow these
instructions may result in damage
to the engine. If you must tow a
stranded watercraft in water and do
not have a hose pincher, be sure to
stay well below the maximum tow-
ing speed of 24 km/h (15 MPH).
NOTE: A red tape on the water supply
hose indicates which hose to pinch.
smo2008-001-072_a
TYPICAL
1. Supply hose with red tape
NOTICE
When finished towing the
watercraft, hose pincher must be re-
moved before operating it. Failure
to do so will result in damage to the
engine.
60
______________

Table of Contents

Related product manuals