MAINTENANCE PROCEDURES
F18J04Y
21
TYPICAL — INSPECT THESE AREAS
1. Water intake
2. Ride plate
Fuses
Fuse Removal/Inspection
If an electrical problem occurs, check
the fuses. If a fuse is burnt, replace by
one of the same rating.
Use the fuse remover/installer in-
cluded in the fuse box to ease fuse
removal.
A15E0KZ
1
2
3
1. Fuse
2. Check if melted
3. Ampere rating
WARNING
Do not use a higher rated fuse as
this can cause severe damage. If a
fuse has burnt out, source of mal-
function should be determined
and corrected before restarting.
See an authorized Sea-Doo dealer
for servicing.
_______________
75
To Next Page
Loading...
Need help?
General