Installation ST94-21 C/Ku-Band TVRO
3.4.3. Pedestal Crate
We recommend that you place the Pedestal Crate in the area that you have chosen to assembly it.
1. This is the Pedestal crate.
2. Remove the outer frame (top and
sides of the crate) by removing the
Philips head screws placed around
the bottom of that secure the outer
frame to the bottom section of the
crate and lift the outer frame off.
3. Remove the plastic covering.
Pedestal
Stand
DAC and BDE Box
Cut the bands holding the Balance Weight
Box along with the Hardware and
Miscellaneous Box. Stage these items in the
location where the Pedestal will be
assembled.
NOTE: Some systems may have lager
groups of assembled counterweight on the
EAR Controlled - ECCN EAR99
To Next Page
Loading...
