Sealife ReefMaster Mini - Page 48

EN-46
To Cancel the Protection
To cancel protection for only one image, display the image that you want to remove
the image protection.
1. Select [Protect] with the  /  buttons from the playback menu, then press the OK
button.
2. Select [Single] or [All] with the
 /  buttons, then press the OK button.
3. Select [Cancel] with the
 /  buttons, then press the OK button.
 Press continuously the  button to return to the playback mode. The removal
of image protection has been executed.
Protecting Selected Images
1. Select [Protect] with the  /  buttons from the playback menu, then press the OK
button.
2. Select [Select] with the  /  buttons, then press the OK button.
 The images are displayed in the thumbnail display.
3. Select the image you want to protect with the
 /  /  /  buttons, then press the
OK button.
4. If you want to cancel the protection of selected image respectively, follow the steps
mentioned in “To Cancel the Protection” above to set.
 Formatting an SD memory card overrides protection, and erases all images
regardless of their protected status.