4 Installation and mounting details
The installation of Sprint 211 must be performed with extra care and attention. The existence of dangerous
electrical voltage may be fatal. Hence, these operations should be performed only by skilled personnel.
4.1 Lifting the meter
Meter should be handled with care while lifting and transferring from one place to another.
4.2 Unpacking the Meter
The meter needs to be unpacked from its original packing before installation.
Open the box cover and take out the meter vertically.
4.3 Precautions & safety practices
• While working with live equipment, always wear hand-gloves made of an insulating material.
• Disconnect the mains supply before meter installation.
• Ensure that there are no loose or exposed electrical connection(s) or uninsulated, live wires near, or at,
the installation site.
• Follow standard precautions to prevent damage due to electrostatic discharge while handling external
antenna port.
If necessary, use fast-drying, commercially available insulation coating to cover the exposed
electrical wiring.
• Always use proper tools and equipment.
• Never use damaged tools.
The use of damaged tools is major cause of installation-related accidents. Improper tools may
cause an irreversible damage to the meter and its accessories.
• When the meter is being installed within the premises like an apartment (inside), always install it at a
safe height which allows clear vision of meter display and easy access to meter buttons.
• Never connect a load which makes the meter operate outside its specified limits.
Operating current range of meter is specified on the rating plate.
4.4 Quick start
This section is intended only for experienced field staff with prior exposure to energy meter installation. It
summarizes the recommended sequence of actions for installation.
4.4.1 Getting started
1. Select an easily accessible mounting location for the meter. When the selected location has multiple
meter installations, identify the correct consumer installation.
Page 16 of 48 Sprint 211 Installation Manual BGX701-160-R01