Secure Sprint 211 User Manual

9 Appendix 3: Opening and fitting the secondary terminal
cover
Follow these instructions to open the secondary terminal cover.
1 First pull downwards at the projection marked with arrows at the snap area, while holding the cover in
place around the side walls. This will loosen the cover from the top. Refer to the figure below.
2 Next pull the cover at the side walls in upward direction to dismantle completely.
BGX701-160-R01 Sprint 211 Installation Manual Page 45 of 48

Secure Sprint 211 Specifications

General

Brand	Secure
Model	Sprint 211
Category	Measuring Instruments
Language	English