EasyManuals Logo

Secure Sprint 211 User Manual

Secure Sprint 211
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
3.2 Firmware
The meter supports the following firmware:
Metrology firmware
Metrology firmware controls the measurement functions. It also provides an operating system for the
application firmware. This firmware is fixed and cannot be upgraded.
Application firmware
Application firmware controls the functions of the meter outside of metrology. It is possible to remotely
upgrade this firmware to change the meter operation. Upgrading or updating the firmware will not affect
the meter data unless the update involves changing the parameters of such data. Information related to
load survey, transactions, events and storage or contents in billing registers are not affected during these
upgrades.
Note: The current firmware name and version are available in meter readings and on the meter’s display.
3.3 Handling, storage and operating conditions
The Sprint 211 meter is an electronic device containing delicate components, which should be handled carefully
during transit, storage, and installation. The meter should be protected from physical vibration and shocks.
Wherever possible the meter should be kept in its original packaging until it is installed at the customer’s site.
Temperature and humidity must be maintained within the limits expressed in the above table.
Proper installation and removal procedures should be followed, in order to prevent damage or injury. Physical
damage to the meter’s case could indicate damage to internal components. Under no circumstances should an
attempt be made to install a damaged meter.
A visual inspection should be performed before installing the meter. The following should be checked, as a
minimum:
Protective class
II
5 Environmental
Operating Temperature
as per IEC standard
Range
Indoor Meter
Specified operating range -10 °C to +40 °C
Limit range of operation -25 °C to +55 °C
Limit range for storage -25 °C to +55 °C
Limit range for
transportation
-25 °C to +70 °C
Operating Humidity Annual mean < 75 %
For 30 days, spread in a
natural manner over one
year
95 % (non- condensing)
Occasionally on other days 85 %
Page 14 of 48 Sprint 211 Installation Manual BGX701-160-R01

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Secure Sprint 211 and is the answer not in the manual?

Secure Sprint 211 Specifications

General IconGeneral
BrandSecure
ModelSprint 211
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals