Important
As part of Secure Meters continuous endeavour to improve product design, the specifications mentioned in this
manual are liable to change anytime and therefore availability of features is product build specific.
Specifications / features listed in this document are the most advanced available with Secure Meters on the date
of release of this document, and hence should not be considered as default. Availability of all or some of the
same depends upon the product builds and may not be readily available. Sales team should be contacted for
queries, if any.
No part of the manual, or its content thereof, must be published, distributed, scanned or copied, in either
electronic form or otherwise, without prior information and express consent of Secure Meters.
While all efforts have been made by Secure Meters to minimize errors, some errors may inadvertently exist.
Secure Meters undertake to correct such errors wherever possible, and request feedback from users in this
regard.
Secure Meters reserve the right to alter some or whole of the specifications mentioned in this document without
any prior notice.
For any queries or clarifications, the user is requested to email the Secure Meters’ support team at
tech.support@securemeters.com
In most countries, electrical installations comply with more than one set of regulations issued by National
Authorities or by recognized private bodies. It is essential to take into account these local constraints.
Secure Meters have duly conducted product quality tests as per regulations based on the observance of
rigorous safety rules in the design and realization of the product.
In order to prevent tampering, the meter should be appropriately sealed after installation. Inappropriate handling
of the seal may cause damage to the meter thus creating a false impression of being tampered with.
Please take note of the warning and caution icons presented in this manual as follows:
This icon indicates the existence of dangerous electrical voltage. These
operations must only be performed by qualified personnel.
Attention
This icon warns the user to take special precautions whilst performing an
operation. The procedure must be followed as described in the manual.
Possible
BGX701-160-R01
Sprint 211 Installation Manual Page 5 of 48
To Next Page
Loading...
Need help?
General
