Secure Sprint 211 - Information Printed on Sprint 211

15. 31.5 Ampere load contactor (variant specific)- This is provided in Sprint 211 to support basic load control
functions such as load switch actions, switch time randomisation and load cycling.
16. Phase Selection Sockets – Either of phases i.e. A, B or C can be used to energise the auxiliary load
connected to L1 with the help of a phase selection provision provided on Sprint 211’s terminal block. This is
done by tightening the screw provided in any ONE of the phase selection sockets above each phase.
CAUTION – DO NOT connect the auxiliary load in parallel to more than one phase at a time. This will lead to a
short circuit. For a given meter installation, the auxiliary load can be connected to only one phase. This is a
variant specific feature.
2.2 Information printed on Sprint 211 front cover
Figure 3: Information on the Sprint 211 front cover
Lithium battery
Double insulation
symbol
Meter name
Manufacturer’s
trademark
Type Code
Barcode for
meter serial
number
Meter serial
number
As per load
control variant
Rated operating voltage
Current rating
Class index, Frequency
Temperature
Year of manufacture
BGX701-160-R01 Sprint 211 Installation Manual Page 11 of 48