Sega Snakes & Ladders - Site Fixation and Ventilation; Fixation to Site

ASSEMBLY AND INSTALLATION
20 21
ASSEMBLY AND INSTALLATION
6 6
5
Feed the tickets into the ticket holder ensuring that the ticket passes through the guides.
6
Feed the tickets into the ticket holder ensuring that the ticket passes underneath the ticket rollers.
7
Lower the roller bar and ret the ticket guide, making sure that the guide locks onto the upper bar.
9
Press the ticket feed button to feed a number of tickets out through the front panel checking for ticket jam in
the proccess.
8
Apply power to the cabinet and wait for the machine to initialise.
10
Remove any excess tickets.
Guides
Feed button
Rollers
Upper bar
Ticket guide
Lower bar so that the rollers
come into contact with the
tickets
Repeat the operation to install tickets into the second ticket unit..