Printing in Windows
Printserver User Manual Windows 12
Activating LPR on the Client
1. In the taskbar, enter 'Programs and Features' into the search
box.
The search results are displayed.
2. In the search results, select Programs and Features.
The Programs and Features dialog appears.
3. Select Turn Windows features on or off.
The Windows Features dialog appears.
4. Under Print and Document Services activate LPR Port Monitor.
5. Click OK to confirm.
LPR is activated on the client.
Setting up the Printer on the Client
Requirements
The print server is connected to the network and the printer;
see: Quick Installation Guide.
The print server and the printer are turned on.
The print server has a suitable IP configuration, see: 7.
You know the print server's current IP address; see: 7.
1. Open the Start menu.
2. Select Settings.
The Settings dialog appears.
3. Select Devices.
The Add printers & scanners dialog appears.
4. Select Add a printers or scanners.
Printers and scanners are searched for.
5. Scroll down to the end of the result list and select The printer
that I want isn't listed.
The Add printer dialog appears.
6. Tick Create a new port.
7. From the list Type of port, select Standard TCP/IP Port.
To Next Page
