SEH PS Series - Page 18

Printing in Windows
Printserver User Manual Windows 13
8. Into the Address box, enter the IP address of the print server.
Omit leading zeros from the IP address!
9. Enter a description into the Port name box.
10. Untick Query the printer and automatically select the driver to
use.
11. Click Next.
12. (In the area Device Type, tick Standard.)
13. (Select Generic Network Card from the list.)
14. (Click Next.)
15. From the list Manufacturer and Printers, select the printer
model.
16. Click Next.
17. Enter a description into the Printer name box.
18. Click Next.
The printer is being installed.
19. Click Print a test page.
The test page is printed.
20. Click Finish.
 The printer is set up on the client. Set up the printer port for
LPD/LPR printing13.
Setting Up the Printer Port
Proceed as follows:
1. In the taskbar, enter 'Devices and Printers' into the search box.
The search results are displayed.
2. In the search results, select Devices and Printers.
The Devices and Printers dialog appears.
3. In the list, select the printer.
4. From the shortcut menu, select Printer properties.
The Properties dialog appears.
5. Select the Ports tab.
6. In the list, select the port.