SEH PS Series - Page 64

Device Settings
Print Server User Manual Windows 59
What do you want
to do?
 ’Configuring the Device Time via the Print Server Homepage’
59
 ’Configuring Logical Printers via the InterCon-NetTool’ 59
Configuring the Device Time via the Print Server Homepage
Requirements
 A time server is integrated into the network.
Proceed as follows:
1. Start the Print Server Homepage.
2. Select Configuration – Time.
3. Tick SNTP.
4. Into the Time server box, enter the IP address or the host name
of the time server
(The host name can only be used if a DNS server was configured beforehand.)
5. Select the code for your local time zone from the Time zone list.
6. Click Save to confirm.
 The settings are saved.
Configuring Logical Printers via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
 A time server is integrated into the network.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration - Time from the navigation bar.
4. Tick SNTP.
5. Into the Time server box, enter the IP address or the host name
of the time server
(The host name can only be used if a DNS server was configured beforehand.)
6. Select the code for your local time zone from the Time zone list.
7. Click OK to confirm.
 The settings are saved.