4.8 … program the scheduler (continued)
If the project has to contain as many images as
possible, then the best choice is to create “Photo
Continuous Job” as presented in this example.
In this case, as soon as the previous image is
saved, the next image will be launched without
delay.
Click on “Photo Continuous Job”,edit the job
name and select the profile.
Define the start time and end time
(in hours : minutes). There is no interval because
the image taking is continuous.
Enter repetition defining the number of times this
job is to be repeated in case of multiple jobs.
Finally define a delay between the jobs.
It is possible to create as many jobs as necessary
if different parameters are to be used.
For example it is possible to create 2 sequences
one in full resolution and one in 2x2 resolution.
In this example the start time of the second job is
shifted by 5 minutes to avoid job conflicts. In case
of conflict the job at the top of the list will be
started
Instruction Manual Seitz 6x17 Digital - version 4.05 - May 2013- © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 57
To Next Page
Loading...
