C-7000 SDK REFERENCE MANUAL
3.6.5. SKS_COLOR_TEMPERATURE
SK_GetMeasuringResult () to get the measurement result of color temperature and
deviation
Measurement result is preserved as character string. It shows “Under” in case result is
lower than measurement spec, and it shows “Over” in case the result is higher than
measurement spec.
Correlated Color Temperature
3.6.6. SKS_COLOR_RENDERING_INDEX
SK_GetMeasuringResult () to get the measurement result color rendering index.
Measurement result is preserved as character string. It shows “Under” in case result is
lower than measurement spec, and it shows “Over” in case the result is higher than
measurement spec.
Average Color Rendering Index Ra
Color Rendering IndexR1~R15
3.6.7. SKS_TM30_HUE_BIN_VECTOR
(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult() to get the measurement result of TM-30-18 hue bin vector.
Measurement result is preserved as data of single type. It shows “0.0F” in case the result
is out of measurement spec or C-7000 firmware is not TM-30-18 (FW 24 or lower).
TM-30-18 Hue bin vector, test X
TM-30-18 Hue bin vector, test Y
TM-30-18 Hue bin vector, refer X
TM-30-18 Hue bin vector, refer Y
3.6.8. SKS_TM30
(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult() to get the measurement result of TM-30-18
Measurement result of Rf, Rg is preserved as character string. It shows “Under” in case
result is lower than measurement spec, it shows “Over” in case the result is higher than
measurement spec and it shows “N/A” in case C-7000 firmware is not TM-30-18 (FW V24
or lower).
For measurement result of Hue Bins, please refer to 3.6.7SKS_TM30_HUE_BIN_VECTOR.
TM-30-18 Color fidelity(Rf)