Sekonic C-7000 SDK User Manual

C-7000 SDK REFERENCE MANUAL
No. I401-C-700-034
Page 12
2012/03/01
3.6.9. SKS_SSI
(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult () to get the measurement result of SSI
Measurement result is preserved as character string. It shows the following values in the
table below.
FW Version
Conditions
SSIt, SSId
SSI1, SSI2
V24 or lower
"N/A"
"N/A"
V25 or higher
No Reference
"---"(*1)
Within measuring
range
Measured value
Measured value
Lower than
measurement spec
"Under"
"Under"
Higher than
measurement spec
"Over"
"Over"
*1 Reference light source cannot be selected from C-7000 SDK. Select it on the screen of
SSI mode in C-7000 meter.
SKS_TM30
variable
type
explanation
SSIt
String
SSI Tungsten
SSId
String
SSI Daylight
SSI1
String
SSI Reference light source 1
SSI2
String
SSI Reference light source 2
3.6.10. SKS_TLCI
(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult () to get the measurement result of TLCI-2012/TLMF-2013.
Measurement result is preserved as character string. It shows the following values in the
table below.
FW Version
Conditions
TLCI
TLMF
V24 or lower
"N/A"
"N/A"
V25 or higher
No Reference
"---"(*1)
Within measuring
range
Measured value
Measured value
Lower than
measurement spec
"Under"
"Under"
Higher than
measurement spec
"Over"
"Over"
*1 Reference light source cannot be selected from C-7000 SDK. Select it on the screen of
TLCI/TLMF mode in C-7000 meter.
SKS_TLCI
variable
type
explanation
TLCI
String
TLCI-2012
TLMF
String
TLMF-2013

Sekonic C-7000 SDK Specifications

General

Brand	Sekonic
Model	C-7000 SDK
Category	Measuring Instruments
Language	English