Sekonic C-7000 SDK - Skf_Shutter_Speed; Skf_Measuring_Method; Skf_Result_Value

C-7000 SDK REFERENCE MANUAL
No. I401-C-700-034
Page 9
2012/03/01
3.5.9. SKF_SHUTTER_SPEED
Show shutter speed setting status (flash light)
SKF_SHUTTER_SPEED
description
defined value
explanation
_1SEC
0
1.0second
_1_2SEC
1
1/2second
_1_4SEC
2
1/4second
_1_8SEC
3
1/8second
_1_15SEC
4
1/15second
_1_30SEC
5
1/30second
_1_60SEC
6
1/60second
_1_125SEC
7
1/125second
_1_250SEC
8
1/250second
_1_500SEC
9
1/500second
3.5.10. SKF_MEASURING_METHOD
(Available in C-7000 SDK V2.00 or higher)
Show the Measuring Method in ambient light mode.
※1 C-7000 SDK is valid for setting/acquiring only. C-7000 SDK enables to use only “Single
measuring method”
※2 FW V24 or lower supports only Single measuring method.
SKF_MEASURING_METHOD
description
defined value
explanation
SINGLE_MODE
0
Single measuring method
CONTINUOUS_MODE
1
Continuous measuring method
3.5.11. SKF_RESULT_VALUE
Show measurement value status。
SKF_RESULT_VALUE
description
defined value
explanation
VALUE_NONE
0
there is no measurement value
VALUE_ON
1
there is measurement value