Sekonic C-7000 SDK User Manual

C-7000 SDK REFERENCE MANUAL
No. I401-C-700-034
Page 14
2012/03/01
3.6.14. SKS_MEAS_RESULT
SK_GetMeasuringResult ()to get measurement value result
SK_MEAS_RESULT
variable
type
explanation
ResultFlag
SKF_RESULT_VALUE
Result flag NONE/ON
(refer3.5.11)
Tristimulus
SKS_TRISTIMULUS_VALUE
Tristimulus value
(refer3.6.2)
CIE1931
SKS_CIE1931
CIE1931(CIE1964) Chromaticity
coordinates
(refer3.6.3)
CIE1976
SKS_CIE1976
CIE1976 Chromaticity
coordinates
(refer3.6.4)
ColorTemperature
SKS_COLOR_TEMPERATURE
Correlated Color Temperature
(refer3.6.5)
ColorRenditionIndexes
SKS_COLOR_RENDERING_INDEX
Color Rendering Index
(refer3.6.6)
TM30
SKS_TM30
TM-30-18(*1)
(refer3.6.8)
SSI
SKS_SSI
SSI(*1)
(refer3.6.9)
TLCI
SKS_TLCI
TLCI-2012/TLMF-2013(*1)
(refer3.6.10)
Illuminance
SKS_ILLUMINANCE
Illuminance /Luminous exposure
(refer3.6.11)
DWL
SKS_DOMINANT_WAVELENGTH
Dominant wavelength
(complementary wavelength)
(refer3.6.12)
PPFD
String
Photosynthetic photon
flux density (*2)
PeakWavelength
String
Peak wavelength (*2)
SpectralData_1nm()
Single
1nm spectral data
SpectralData_5nm()
Single
5nm spectral data
*1 Available in C-7000 SDK V2.00 or higher. C-7000 meter FW should be ver. 25 or
higher to get the measured value.
*2 Measurement result is preserved as character string. It shows “Under” in case
result is lower than measurement spec, and it shows “Over” in case the result is
higher than measurement spec.

Sekonic C-7000 SDK Specifications

General

Brand	Sekonic
Model	C-7000 SDK
Category	Measuring Instruments
Language	English