Sekonic C-7000 SDK User Manual

C-7000 SDK REFERENCE MANUAL
No. I401-C-700-034
Page 13
2012/03/01
3.6.11. SKS_ILLUMINANCE
SK_GetMeasuringResult ()to get the measurement result of Illuminance /Luminous
exposure
Measurement result is preserved as character string. It shows “Under” in case result is
lower than measurement spec, and it shows “Over” in case the result is higher than
measurement spec.
SK_ILLUMINANCE
variable
type
explanation
LUX
String
Illuminance(lx) / Luminous exposure(lx・s)
FOOT_CANDLE
String
Illuminance(fc) / Luminous exposure(fc・s)
3.6.12. SKS_DOMINANT_WAVELENGTH
SK_GetMeasuringResult () to get Dominant wavelength (complementary wavelength) /
Excitation purity. Measurement result is preserved as character string. It shows “Under”
in case result is lower than measurement spec, and it shows “Over” in case the result is
higher than measurement spec.
SK_DOMINANT_WAVELENGTH
variable
type
explanation
WAVELENGTH
String
Dominant wavelength
(complementary wavelength)
EXCITATION_PURITY
String
Excitation purity
3.6.13. SKS_MEAS_CONFIG
SK_SetMeasConfig() to get or set the configuration of measurement
SK_MEAS_CONFIG
variable
type
explanation
MeasuringMode
SKF_MEASURING_MODE
Measurement mode
(refer3.5.6 )
FieldOfView
SKF_FIELD_OF_VIEW
View angile
(refer3.5.7)
ExposureTime
SKF_EXPOSURE_TIME
Exposure time
(refer3.5.8)
ShutterSpeed
SKF_SHUTTER_SPEED
Shutter speed
(refer3.5.9)
MeasuringMethod
SKF_MEASURING_METHOD
Mesuring method(※1)
(refer3.5.10)
※1 Available in C-7000 SDK V2.00 or higher

Sekonic C-7000 SDK Specifications

General

Brand	Sekonic
Model	C-7000 SDK
Category	Measuring Instruments
Language	English