Sekonic FLASHMATE L-308X - Explanation of the Liquid Crystal Display (LCD); Contents of Display

2
2. Explanation of the Liquid Crystal Display (LCD)
●
2.
Explanation of the Liquid Crystal Display (LCD)
2-1 Contents of Display
For explanation purposes, the display illustrated here shows icons and readouts
simultaneously. Actual display will never appear like this.
1
Measuring Mode icons (for PHOTO Mode only)
Ambient (
➡
P14)
Cordless Flash (
➡
P18)
Cord Flash (
➡
P20)
2
ISO Display (
➡
P13)
Displays ISO sensitivity setting.
3
Aperture Priority
,
EV Value Display
Appears when Aperture Priority (F) Mode.
（➡
P15
）
Appears when using EV Mode. (
➡
P16)
4
0.1 step display
Depending on set mode, this displays measurement value at 1/10
aperture or 1/10 EV.
5
Shutter speed, frames rate (f/s), shutter angle and Illuminance.
Appears when Shutter Speed Priority (T) Mode.(
➡
P14,
➡
P22)
Appears when shutter speed is in full seconds. (
➡
P14,
➡
P22)
Appears when cine speed is set in frames per seconds.
(
➡
P23,
➡
P25)
Appears when shutter angle is set to a value other than 180 degrees
(CINE Mode only.
➡
P26)
Appears when Lux is selected (Selectable in Custom setting)
(
➡
P24,
➡
P27)
Appears when FC is selected (Selectable in Custom setting)
(
➡
P24,
➡
P27)