23
5. Measurement
●
NOTE
● Use Custom Setting to display shutter speed values in full, 1/2 or 1/3 step increment
(
➡ P31
).
● Shutter speeds can be set from 1/8 to 1/8000 sec. A special grouping of commonly used
Cine Shutter speeds will appear above 1/8000 second (1/24, 1/25, 1/30, 1/48, 1/50, 1/60,
1/96, 1/100, 1/120 sec.).
● Frame rate sets the lower limit to shutter speed. (i.e. If 30 f/s is set, shutter speeds can
be set from 1/30 sec.)
● After the measurement, the aperture value will be automatically adjusted to maintain proper
exposure when changes in shutter speed and/or ISO are made.
● If ”E.o”(over) or “E.u” (under) appears and blinks, the measurement cannot be made at
the selected settings (
➡ P29
).
5-2-2 Frame Rate Setting
Operation
1.
Press MODE Button to select
frame rate display .
2.
Press UP or DOWN Button to set
the desired frame rate.
3.
Press MEASURING B utton
to return to Shutter Speed
Priority Mode, and make a light
measurement simultaneously.
NOTE
● Available frame rates include 8, 12, 16, 18, 24, 25, 30, 32, 48, 50, 60, 64, 96, 100, 120
and 128 f/s.
● Frame rate sets the lower limit to shutter speed. (i.e. If 30 f/s is set, shutter speeds are
settable from 1/30 sec.)
M
O
D
E
UP Button
DOWN Button
MODE Button
To Next Page
Loading...
